Si, credo che il titolo del thread sia fuorviante.
Il video leakato è stato pubblicato da un utente brasiliano, questo è quello che si capisce leggendo le fonti.
ecco appunto io sapevo che dietro al team matrix c'era gente italiana, questa del brasile mi sorgeva nuova
Nuovo video dove si vede meglio che stanno sostituendo realmente un drive 1175.
Questo lascia effettivamente pochi dubbi : tolgono il drive originale, ne montano un altro e fanno partire i backup.
Sempre quello è... PCB non originale e LT che costerà molto!!
Sperando che esca dopo poco, il metodo sui PCB originali sta Corona 4GB che rabbia.....
Ecco cosa scrive il team matrix riguardo al lettoreBefore we begin, some notes regarding the 16D5S drives and why we made the choices that we made :
First of all, the SPI eeprom is locked just like in the old drives and the WP pad is connected to GND, thus making it impossible to erase/rewrite.
Why the old Geremia/kamikaze style method is not feasible in the 16D5S drives :
The area were the WP wire can be cut is less than 1mm in length and the WP bonding wire runs parallel to the DO bonding wire with around 0.1mm of separation between them.
Cutting the WP wire without damaging the DO wire is doable when the chip is decapped and under a good microscope but we can't see any way where someone can do this without some serious lab instruments.
For this reasons we have developed a replacement PCB, similar to our previous Freedom replacement PCB but with some additional hardware needed to cope with the enhanced crypto requirements in the 16D5S firmware.
This PCB will replace the original drive PCB and work on any unmodded Xbox360 (including the 4GB V2 coronas and those with dashboard 15572+ ).
The firmware is finished and stable and has all the features you would expect :
stealth, XGD3, all titles work (basically everything iXtreme 3.0 has) plus some additional features that we are testing and considering for inclusion in the final release.
Segnalibri